kenmore 350 water softener manual
Summary
Get the Kenmore 350 Water Softener Manual! Easy installation guide, troubleshooting tips, and maintenance advice. Download now!
This manual provides comprehensive guidance for installing, operating, and maintaining the Kenmore 350 Water Softener. It ensures optimal performance and addresses troubleshooting for efficient water softening solutions.
Overview of the Kenmore 350 Series
The Kenmore 350 Series is a high-efficiency water softening system designed to provide soft water for entire households. It features advanced technologies like IntelliSoft for optimal performance and a high-flow valve for consistent water pressure. The series is known for its reliability, durability, and user-friendly design, making it a popular choice for homeowners seeking effective water softening solutions.
Importance of the Manual for Proper Usage
The manual is essential for understanding the Kenmore 350’s operation, installation, and maintenance. It provides step-by-step instructions, safety guidelines, and troubleshooting tips, ensuring the system runs efficiently. Reading it helps users maximize the softener’s benefits, prevent errors, and maintain warranty coverage, making it a crucial resource for optimal performance and longevity of the water softener.
Key Features and Benefits of the Kenmore 350 Water Softener
The Kenmore 350 offers high flow valve technology, IntelliSoft for efficient softening, and a large capacity for whole-house use, ensuring soft water with minimal maintenance and optimal performance.
High Flow Valve Technology
The Kenmore 350 Water Softener features a high flow valve, designed to maintain strong water pressure even during simultaneous use of multiple faucets or appliances. This technology ensures minimal pressure drop, delivering a consistent flow rate. It’s ideal for large households or homes with high water demand, providing soft water efficiently without compromising performance. The high flow valve is a key feature highlighted in the manual, ensuring optimal water supply and system reliability.
IntelliSoft Technology for Efficient Water Softening
The Kenmore 350 incorporates IntelliSoft Technology, designed for efficient water softening. This advanced system monitors water usage patterns and adjusts regeneration cycles to ensure soft water is always available. It minimizes salt consumption and optimizes water flow, making it eco-friendly and cost-effective. The technology ensures a smooth transition between hard and soft water, maintaining consistent quality throughout your home, as detailed in the manual for optimal performance.
Large Capacity for Whole-House Water Softening
The Kenmore 350 offers a high-capacity design, ideal for whole-house water softening. With a rated softening capacity of up to 26,900 grains and a salt dose of 7.9 lbs, it efficiently handles the needs of medium to large households. This ensures continuous soft water supply, preventing scale buildup and maintaining appliance efficiency, as specified in the manual for reliable performance across all water fixtures and systems.
Technical Specifications of the Kenmore 350 Water Softener
The Kenmore 350 has a rated softening capacity of 12,600 grains (2.5 lbs salt dose) to 26,900 grains (7.9 lbs), suitable for medium to large households, meeting California efficiency standards.
Rated Softening Capacity and Salt Dose
The Kenmore 350 offers a rated softening capacity of 12,600 grains with a 2.5 lbs salt dose, and 26,900 grains with a 7.9 lbs dose. This ensures efficient water softening for various household sizes, adhering to California efficiency standards. The system is designed to handle different water hardness levels effectively, providing soft water consistently while optimizing salt usage.
Compatibility with Various Water Conditions
The Kenmore 350 is designed to handle a wide range of water hardness levels, ensuring optimal performance in diverse water conditions. It meets California Efficiency Requirements and complies with local codes, such as Massachusetts plumbing standards. The system efficiently adapts to varying water qualities, providing consistent soft water while maintaining compliance with regional regulations for reliable operation in different households.
Dimensions and Installation Requirements
The Kenmore 350 Water Softener requires specific space for installation, ensuring proper fit and functionality. It is essential to follow the manual’s guidelines for dimensions and placement to accommodate the unit’s size and connections. Proper installation involves securing the system, connecting inlet/outlet valves, and ensuring drainage setup meets local plumbing codes for safe and efficient operation in your home.
Installation and Setup Guide
Plan your installation carefully, ensuring proper site preparation and adherence to the manual’s step-by-step instructions for a seamless setup process.
Step-by-Step Installation Instructions
Plan your installation carefully, ensuring proper site preparation and adherence to the manual’s instructions. Connect the inlet and outlet hoses securely, then install the bypass valve. Mount the softener and drain line according to specifications. Ensure all connections are leak-free and comply with local plumbing codes. Follow the manual’s guidelines for electrical and water supply connections to complete the setup successfully. Always test the system post-installation to confirm proper function.
Connecting the Water Softener to Your Home’s Water Supply
Connect the inlet and outlet hoses to the designated ports on the softener, ensuring a secure fit to prevent leaks. Install the bypass valve according to the manual’s instructions, allowing for easy maintenance. Verify that all connections comply with local plumbing codes and are properly sealed. After connecting, perform a leak check and flush the system to ensure proper water flow and functionality. This step is crucial for optimal performance and longevity of the system.
Setting Up the Bypass Valve and Drain
Install the bypass valve to enable easy switching between soft and hard water during maintenance. Connect the drain line to a nearby floor drain or utility sink, ensuring it is securely fastened. Position the drain at the recommended height to prevent backflow. Tighten all connections firmly and test for leaks. Proper setup ensures smooth operation and prevents water damage. Follow the manual’s diagrams for precise installation guidance.
Operating the Kenmore 350 Water Softener
Understand the Deluxe Valve functions, program softening cycles, and perform daily checks to ensure smooth operation and optimal water quality. Follow manual instructions carefully.
Understanding the Deluxe Valve and Its Functions
The Deluxe Valve is a central component of the Kenmore 350 Water Softener, controlling water flow and softening processes. It regulates backwashing, rinsing, and brine refill cycles. The valve ensures efficient operation by directing water through the resin bed for softening and managing drain cycles. Proper programming and maintenance of the Deluxe Valve are essential for optimal performance and water quality, as detailed in the manual.
Programming the Softener for Optimal Performance
Programming the Kenmore 350 Water Softener involves setting the hardness level, salt dosage, and regeneration frequency. Adjust these settings based on your water quality and household needs. Use the control panel to input grain capacity and regeneration timing. Ensure the salt level is maintained for efficient operation. Refer to the manual for specific instructions to customize settings accurately and maximize softening performance effectively.
Daily Maintenance Tips for Smooth Operation
Regularly check salt levels in the brine tank to ensure optimal performance. Clean the brine tank and resin bed periodically to prevent buildup. Inspect the bypass valve and drain line for proper function. Monitor water flow and pressure, addressing any inconsistencies promptly. Replace filters as recommended to maintain water quality. Keep the control panel clean and ensure all connections are secure for uninterrupted operation and longevity of the system.
Troubleshooting Common Issues
Identify and resolve salt bridges, low water flow, and system resets. Clean the resin bed and ensure proper salt levels for consistent softening performance and reliability.
Identifying and Resolving Salt Bridge Problems
A salt bridge occurs when a crust forms in the brine tank, preventing salt from dissolving. Check for visible crust, low salt levels, or inconsistent softening. To resolve, clean the brine tank, dissolve the crust with warm water, and ensure proper salt levels. Regular maintenance, such as annual cleaning, helps prevent salt bridges and maintains optimal softening performance.
Addressing Low Water Flow or Pressure Issues
Low water flow or pressure can occur due to valve obstructions or improper system setup. Check the bypass valve for proper alignment and ensure it’s fully open. Clean or replace the resin bed if clogged. Verify programming settings for correct water hardness levels. Inspect inlet/outlet valves for blockages and ensure all connections are secure. Regular maintenance and cleaning can prevent such issues and restore normal water flow.
Resetting the System After Power Outages
After a power outage, the Kenmore 350 Water Softener may require resetting. First, ensure the power is restored and all connections are secure. Press and hold the “Select” button for 3 seconds to reset the system. Allow the softener to complete its initialization cycle. Reprogram the system if custom settings were lost. Consult the manual for detailed steps to ensure proper functionality and water quality are restored.
Maintenance and Care of the Kenmore 350 Water Softener
Regular maintenance ensures optimal performance. Clean the resin bed, check the brine tank, replace filters, and sanitize the system periodically for efficiency.
Cleaning the Resin Bed and Brine Tank
Cleaning the resin bed and brine tank is essential for maintaining your Kenmore 350 Water Softener’s efficiency. Dissolve 1 cup of salt or water softener cleaner in the brine tank and let it sit. Drain the tank and rinse thoroughly. For the resin bed, use a water softener cleaner every 2-3 months. Follow the manual’s instructions for proper cleaning procedures to ensure optimal performance and longevity of your system.
Replacing Parts and Filters as Needed
Regularly inspect and replace parts like the resin bed, filters, and valves to maintain your Kenmore 350 Water Softener’s performance. Use genuine Kenmore parts for compatibility. Follow the manual’s step-by-step guide for replacement. Ensure the system is turned off and water supply is disconnected before starting any maintenance to avoid leaks or damage. Proper part replacement ensures soft water quality and extends the system’s lifespan.
Sanitizing the System for Optimal Performance
Sanitize your Kenmore 350 Water Softener periodically to prevent bacterial growth and maintain water quality. Use a chlorine or vinegar solution to clean the resin bed and internal components. Follow the manual’s instructions for the sanitization process. Regular sanitization ensures optimal performance, prevents odor, and extends the system’s lifespan. Always wear gloves and ensure proper ventilation during the process.
Warranty and Support Information
The Kenmore 350 Water Softener comes with a standard factory warranty, including 1 year for parts and labor, 3 years for electronics, and 10 years for tanks. Contact Kenmore customer support for inquiries or repairs.
Standard Factory Warranty Details
The Kenmore 350 Water Softener is backed by a comprehensive warranty. It includes 1 year for parts and labor, 3 years for electronic components, and a 10-year warranty for the resin and brine tanks. This ensures long-term protection and reliability for your water softening system, providing peace of mind for years to come.
Contacting Kenmore Customer Support
For assistance with your Kenmore 350 Water Softener, visit the official Kenmore Water Solutions website or contact their customer support team. You can reach them via phone at 1-800-426-9345 or submit a request through their online portal. The support team is available to address questions, troubleshooting, and service needs, ensuring your water softener operates efficiently and effectively.
Accessing Online Resources and Manuals
Access the Kenmore 350 Water Softener manual and additional resources on the official Kenmore Water Solutions website. Downloadable manuals, guides, and FAQs are available for models like the IntelliSoft 350 Series 625.383560. These resources provide detailed instructions for installation, operation, and troubleshooting, ensuring you maximize your water softener’s performance and longevity.
Additional Resources for Users
Explore downloadable manuals, guides, and FAQs on the Kenmore Water Solutions website for comprehensive support and troubleshooting. Visit KenmoreWaterSolutions.com for detailed resources.
Downloadable Manuals and Guides
The Kenmore 350 Water Softener manual and additional guides are available for download on the official Kenmore Water Solutions website. Users can access PDF versions of the IntelliSoft 350 Series manual, installation instructions, and troubleshooting guides. These resources provide detailed information on operation, maintenance, and repair. Visit KenmoreWaterSolutions.com to download the latest versions, ensuring you have the most up-to-date instructions for optimal performance and care of your water softener system;
FAQs and Common User Questions
Find answers to frequently asked questions about the Kenmore 350 Water Softener in the FAQ section on Kenmore’s official website. Topics include troubleshooting common issues like salt bridges and low water flow, understanding system maintenance, and programming the softener. Additional resources like user guides and troubleshooting tips are also available to help users resolve issues quickly and efficiently, ensuring smooth operation of their water softening system.
Kenmore Water Solutions Website and Support
Visit KenmoreWaterSolutions.com for comprehensive support, including downloadable manuals, installation guides, and troubleshooting tips. The website offers detailed resources for the Kenmore 350 Water Softener, ensuring users can resolve issues and optimize system performance. Additionally, customer support is available via phone or online requests, providing direct assistance for any questions or concerns about your water softening system.
Following this manual ensures optimal performance and longevity of your Kenmore 350 Water Softener, providing soft water efficiently while maintaining system health and durability over time.
Final Tips for Maximizing Your Kenmore 350 Water Softener
- Regularly monitor water hardness levels to ensure optimal softening performance.
- Adjust salt dosage based on water usage and hardness for efficiency.
- Clean the resin bed periodically to prevent mineral buildup.
- Sanitize the system every 3-6 months for optimal hygiene.
- Check and replace filters as recommended to maintain water quality.
Importance of Regular Maintenance and Monitoring
Regular maintenance ensures the Kenmore 350 Water Softener operates efficiently, extending its lifespan and performance. Monitoring water hardness levels, salt dosage, and system cleanliness prevents issues like salt bridges or resin degradation. Routine checks and timely part replacements help maintain optimal water quality and system reliability, ensuring soft water delivery consistently.